What is the reason that Carbon fiber heating film easy to burn out
People with a little industry knowledge basically know that carbon fiber is a semiconductor , and the wire connected to the heating sheet is a conductor, when the two are combined with conductive heating , the contact point must be in good contact to ensure normal and stable work .
But in reality is not the case, the manufacturer is basically through simple contact conduction , so that it is easy to have poor contact , leading to the appearance of sparks at the joint , the cause of fire and burning is from this , poor contact is generally caused by the connection point of the wire and copper strip , simple soldering iron welding , not the best solution for long-term design .
The market of Carbon fiber heating film is more common , it can be said that the installation is convenient , the price is relatively cheap , most important is to achieve low voltage heating rapid heating method , the love of the majority of support , with the loss of time , drawbacks of carbon fiber heating film more and more , the bad side is more and more prominent , the common drawbacks are the following points .
1. Local burn out , including copper wire burn , product fire and other phenomena
2. Nervous non-heating phenomenon often occurs
3. It is prone to permanent disconnection
4. The joint is easy to fall off and is prone to poor contact
5. The temperature is easily out of control
Reasons for the above bad situation
For technical solutions, you can consult “Guangdong Xingguang Electric Heating Products Co., LTD “