Which Specifications Are Available For First twist - Then Plating Silicone Wire ?
The first twist after plating silicone wire is currently sold for 26AWG-24AWG silicone wire, long-term stock supply, in addition to special specifications such as 22AWG,20AWG,18AWG, there is a certain demand can also be separately processed according to customer requirements
Common specification table for stranding and then plating silica gel wire
name | Wire number | Safety regulations | conductor | Adhesive diameter | MOQ | price | packing of products |
Twist before plating the wire | 26AWG | 3239 | 7/0.16TS | 1.49MM | 6100M | Consult manufacturer | 305M/roll |
Twist before plating the wire | 24AWG | 3239 | 7/0.20TS | 1.60MM | 6100M | Consult manufacturer | 305M/roll |
Twist before plating the wire | 22AWG | 3239 | 7/0.25TS | 1.76MM | 12200M | Consult manufacturer | 305M/ roll |
Twist before plating the wire | 20AWG | 3239 | 7/0.32TS | 1.91MM | 12200M | Consult manufacturer | 305M/ roll |
Twist before plating the wire | 18AWG | 3239 | 7/0.39TS | 2.17MM | 12200M | Consult manufacturer | 305M/ roll |
|
|
|
|
|
|
|
|
How to improve the speed of processing tin on silicone wire cutting strip?
Silicone wire is commonly known as silicone electric wire, simply called wire, the market is more common , mainly used in household electronics, electronic lighting,LDE lamps , harness processing, signal transmission , electrical energy output and other purposes , the general operation mode for buyers to find processing businesses, business to buy wire factory , through various equipment processing into a certain length and tin , whole process than More cumbersome, with more labor can not produce output .
What are some good ways to solve this problem?
In 2016, I believe that the most expensive is labor, even some products has many patience, and the last calculation is a vain busy, at least I often have such customer feedback , saying that the business in 2016 is very difficult to do, do not make money, etc., think about it , some wires only earn 1-2 cents for one meter , can not do much wire a day , profit is relatively low, many customers have feedback need help And so on , I also recommended to them the first rubber after the plating of silicone wire .
Is it really cheap of First twist and then plating?
“First twist and then plating “is more expensive than ordinary silicone wire, like my company's 3239.26AWG First twist and then plating, it is more expensive than ordinary silica gel wire about 4 cents per meter, but it saves the process and improves the efficiency . The old process is a person cut line , a person is responsible for the tin, the output is limited every day, after using the first stranded after plating silica gel wire, before 2 Personally responsible for a machine, now the reverse, a 4-8 machines can be opened, as long as the machine set the length, regular random inspection of the length of the cutting line can be, about the peeling first copper wire will be loose, good or not on the tin problem , there is no longer, old process is 1 +1 =2 people (limited capacity) Now the new process is 2 +2 =1 people (limited capacity &tim es; 4 times), in today's difficult business situation, customers require quality OK, but also require cheap prices, standing in the supplier's point of view to analyze, we insulation can not be quantity .
Contact information
Shenzhen XingGuang Electric Heating Products Co., LTD
Yuan Jianwei13510077307
QQ:2355868139/695849489
